Progressive-turf-equipment PM36 Manual de usuario descargar pdf

PRO-MAX 36 – PTO UPDATE

The Pro-Max 36 Rotary Finishing Mower has been sold since the early 2000’s, and there

were a number of early machines that experienced failures of the Intermediate Driveshaft.

Progressive Turf has decided to provide an update for all of the PM36 mowers affected to

date. This will include all serial numbers from 0136002 to 0236026 only.

The problem is that on some machines the splined stub on the end of the intermediate

shaft (item 1) has either broken off or twisted. The cause has mainly been for two

reasons. The mower has had sudden surge of power from engaging the PTO too quickly

causing the stub shaft to twist or the input shaft has bottomed out when turning causing

the stub shaft to break.

Progressive Turf has provided a new intermediate shaft tube with a 1 ¾” diameter stub in

place of the 1 3/8” original. This required the hanger bearing to be larger and a new yoke

for the back of the input PTO shaft that is also supplied. There is also a new PTO shield

tube for the Input Shaft that has an indicator for turning with the mower. This indicator

will give the operator a visual position of the Input Shaft to eliminate fully collapsing the

shaft.

NOTE: The slide yoke removed from the input shaft should be kept for a spare to be

used on the tractor end of the shaft and the flange bearing removed can be used on the

wings or the rear drive shaft.

1 2 3 4 5

1 PRO-MAX 36 – PTO UPDATE The Pro-Max 36 Rotary Finishing Mower has been sold since the early 2000’s, and there were a number of early machines that

2 ITEMS INCLUDED IN PRO-MAX PTO UPDATE KIT REPLACEMENT SHAFT TUBE FOR INTERMEDIATE SHAFT DISASSEMBLY TUBE FOR REMOVING THE YOKE SET F

3 PTO UPDATE – INSTALLATION INSTRUCTIONS: Updating the Input Shaft (item 4): 1. Remove the Input Shaft (item 4) from the tractor and then compl

4 Updating the Intermediate Shaft (item 7): 1. Remove the PTO Support Bracket (item 3) from the frame. Be sure not to lose the Spacers (item 6) und

5 Mounting Shafts Back on the Machine: 1. Slide the Intermediate Shaft (item 7) onto the main gearbox. 2. Take the PTO Support Bracket (item 3) a

Sin comentarios

Progressive-turf-equipment PM36 Manual de usuario